The MK Logic 1 Gang Blank Plate (model number 3827) is a white plastic blank plate with square edges.
On the rear of the plate are eight small knockouts, two on each side to permit passthrough of a flex while the centre of the plate may also be removed to allow a cable to enter.
Two fixing screws are provided.
The MK Albany Plus 13 amp Connection Unit (model number K941) is a switched double-pole connection unit intended to provide protection and switching. The switch has round edges and features a red indicator visible when in the on position.
The fuse carrier is protected with a flat-head screw, and the accessory is provided with a 13 amp fuse.
On the rear of the accessory, the live, neutral, and earth terminals are split into load and supply. The earth terminals are connected together, unaffected by the switch, and provide earthing to the metalwork.
A number of finishes are available including brushed stainless steel (BSS), brushed chrome (BRC), matte chrome (MCO), polished chrome (PCR), and satin brass (SAB). The model number if affixed with the three-letter finish code.
A variant is available which provides for an appliance flex to be passed through the front of the faceplate, however this shares the same model number as the variant without passthrough.
The MK Logic Plus TV/FM and Satellite Co-Axial BT Socket (model number K3566DAB) is a combination plate which features connections for television, radio, satellite, and telephone in a two-gang layout.
On the left-side of the plate is a female FM/DAB coaxial BNC connector, a male television coaxial BNC connector, and two female F connectors labelled ‘2’ and ‘1’.
The right-side of the plate features an unlabelled second male BNC connector for television and finally a RJ11 telephone socket.
The rear of the plate has mounting points for the included screws. All the television, radio, and satellite connectors are screened with lidded covers over the terminals.
The MK Logic Dimmer Switch (1501WHI) is a dual switch that is part of the Logic range, which has a single fixed load switch on the left, and a variable load combination switch and rotator on the right. It also features an in-built fuse carrier intended to take a three amp fuse located on the bottom edge of the accessory.
The fixed load portion of the switch is two-way with connections for L1 and L2.
A maximum load of 400 watts is specified at 240 volts, while the packaging suggests a minimum load of 60 watts.
